1800 Mobile Desiccant Dehumidifiers
Introducing the Phoenix 1800 line of desiccant dehumidifers - the 1800DX and 1800XL VTO. This desiccant has 1800 CFM of process air while drawing only 16 amps at 115 volts. Both versions of the 1800 are constructed of durable, weather resistant stainless steel and use an advanced silica gel rotor. The 1800 has up to 6 days run time on only 100 gallons of propane, beating all other desiccants in its class. The 1800 CFM desiccant is six times more efficient than competitive heat- based systems!
The Phoenix 1800DX includes a high performing, high efficiency desiccant dehumidifier, a 16' tandem axle V-nose trailer with electric brakes and 120 gallon DOT approved propane cylinder. The patent-pending Phoenix 1800XL VTO Desiccant System is designed to adjust its output temperature reducing the need for mechanical cooling or heating. VTO (Variable Temperature Output) technology allows you to modulate your process air temperature simply by setting the thermostat provided on the unit. The Phoenix 1800XL VTO is a complete mobile drying system including a high capacity, high efficiency desiccant dehumidifier with variable temperature output, an 18' tandem axle V-nose trailer with electric brakes, a 12kW Kohler generator, a 120 gallon DOT approved propane cylinder, and 22' of shelving to store and transport anything else you might need to help speed your drying at the job site. Running the on-board generator option allows the entire trailer system to stand alone as a drying power station for use throughout the job, supplying an additional 64 amps at 115 volts available for your drying equipment. The desiccant and generator, used in combination, can run over 2 days on 100 gallons of propane. Both the Phoenix 1800DX and the Phoenix 1800XL VTO Systems are the perfect first-responders to any drying emergency.

Phoenix 1800DX
Desiccant Power: 115 Volt, 16 amps
Water Removal: 1,000 pints/day @ AHAM
Blower: 1800 Process CFM
Operating Range: -10˚F to 140˚F
Filters: 16" x 16" x 2"
Duct Options: 14" Flex and Lay-Flat
Trailer: 7' x 16' Dual Axle, V-nose Trailer (nominal), rear ramp door, dual side access doors
Propane Cylinder: Onboard 120 gallon DOT approved LP tank.
Warranty: Two years; 1st year parts and service
2nd year Silica Gel Rotor

Phoenix 1800XL VTO
Desiccant Power: 115 Volt, 16 amps
Water Removal: 1000 pints/day @ AHAM
Blower: 1800 Process CFM
Operating Range: -10˚ to 140˚F
Filters: 16" x 16" x 2"
Duct Options: 14" Flex and Lay-Flat
Trailer: 7' x 18' Dual Axle, V-nose Trailer (nominal), rear ramp door, dual side access doors
Propane Cylinder: Onboard 120 gallon DOT
Approved LP tank
Generator: 12kW LP Generator
Warranty: Two years; 1st year parts and service 2nd year Silica Gel Rotor